Table of Contents
Advertisement
Figure 148. Installing the R1 paddle card
Figure 149. Installing the R4 paddle card
Optional serial COM port
This is a service technician replaceable part only.
Removing the serial COM port
The procedure to remove serial COM port from Riser 3 or 4 is same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air shroud
4. If required, remove PCIe card from slot 7.
Safety
instructions.
Before working inside your
or
remove the GPU air
shroud.
system.
Installing and removing system components
157
Advertisement
Table of Contents
