Config Ip Forwarding; Show Ip Stats; Config Routing; Show Ip Vlan - NETGEAR GSM7324 Reference Manual

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Format
Default Time to Live
Router ID
Routing Mode
IP Forwarding Mode

config ip forwarding

This command enables or disables forwarding of IP frames.
Default
Format

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format

config routing

This command enables or disables the IP Router Admin Mode for the master switch.
Format

show ip vlan

This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format
MAC Address used by Routing VLANs
bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It
will be displayed above the per-VLAN information.
8-6
show ip summary
The computed TTL (Time to Live) of forwarding a packet from
the local router to the final destination.
Is a 32 bit integer in dotted decimal format identifying the router,
about which information is displayed. This is a configured value.
Shows whether the routing mode is enabled or disabled.
Shows whether forwarding of IP frames is enabled or disabled.
This is a configured value.
enable
config ip forwarding <enable|disable>
show ip stats
config routing <enable|disable>
show ip vlan
Is the MAC Address associated with the internal
May 30, 2003 Beta Draft
Routing Commands