Show Logging Buffered; Show Logging Hosts - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Console
The minimum severity to log to the console log. Messages with an equal or lower
Logging
numerical severity are logged.
Severity Filter
Buffered
Shows whether buffered logging is enabled.
Logging
Syslog Logging Shows whether syslog logging is enabled.
Log Messages
Number of messages received by the log process. This includes messages that are
Received
dropped or ignored.
Log Messages
Number of messages that could not be processed due to error or lack of resources.
Dropped
Log Messages
Number of messages sent to the collector/relay.
Relayed

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode
Privileged EXEC
Term Definition
Buffered
Shows whether the In-Memory log is enabled or disabled.
(In-Memory)
Logging
Buffered
The behavior of the In Memory log when faced with a log full situation.
Logging
Wrapping
Behavior
Buffered Log
The count of valid entries in the buffered log.
Count

show logging hosts

This command displays all configured logging hosts.
Format
show logging hosts
Mode
Privileged EXEC
Term Definition
Host Index
(Used for deleting hosts.)
IP Address /
IP address or hostname of the logging host.
Hostname
ProSafe Managed Switch
Utility Commands
532