Show Logging Buffered; Show Logging Hosts - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Log Messages
Number of messages received by the log process. This includes messages that are
Received
dropped or ignored.
Log Messages
Number of messages that could not be processed due to error or lack of resources.
Dropped
Log Messages
Number of messages sent to the collector/relay.
Relayed

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode
Privileged EXEC
Term Definition
Buffered
Shows whether the In-Memory log is enabled or disabled.
(In-Memory)
Logging
Buffered
The behavior of the In Memory log when faced with a log full situation.
Logging
Wrapping
Behavior
Buffered Log
The count of valid entries in the buffered log.
Count

show logging hosts

This command displays all configured logging hosts. The <unit> is the switch identifier and
has a range of 1-8.
Format
show logging hosts <unit>
Mode
Privileged EXEC
Term Definition
Host Index
(Used for deleting hosts.)
IP Address /
IP address or hostname of the logging host.
Hostname
Severity Level
The minimum severity to log to the specified address. The possible values are
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug
(7).
Port
The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status
The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
ProSafe Managed Switch
Utility Commands
519