Show Auto-Voip - NETGEAR ProSafe GSM7228PS Cli Manual

Default disabled
Format
auto-voip all
Mode Global Config
no auto-voip all
Use this command to disable VoIP Profile on the interfaces of the switch.
Format
no auto-voip all
Mode Global Config
auto-voip
Use this command to enable VoIP Profile on the interface.
Default disabled
Format
auto-voip
Mode Interface Config
no auto-voip
Use this command to disable VoIP Profile on the interface.
Format
no auto-voip all
Mode Interface Config

show auto-voip

Use this command to display the VoIP Profile settings on the interface or interfaces of the switch.
Format
show auto-voip interface {<unit/slot/port>|all}
Mode Privileged EXEC
Quality of Service (QoS) Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
6-49