no auto-voip
Use this command to disable VoIP Profile on the interface.
Format
no auto-voip all
Mode
Interface Config
show auto-voip
Use this command to display the VoIP Profile settings on the interface or interfaces of the
switch.
Format
show auto-voip interface {<unit/slot/port>|all}
Mode
Privileged EXEC
Field
Description
AutoVoIP Mode The Auto VoIP mode on the interface.
Traffic Class
The CoS Queue or Traffic Class to which all VoIP traffic is mapped to. This is not
configurable and defaults to the highest CoS queue available in the system for data
traffic.
ProSafe Managed Switch
Quality of Service (QoS) Commands
489