Set Igmp Mcrtrexpiretime; No Set Igmp Mcrtrexpiretime; Show Garp; Show Gmrp Configuration - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

set igmp mcrtrexpiretime

This command sets the Multicast Router Present Expiration time on the system. This is the amount
of time in seconds that a switch will wait for a query to be received on an interface before the
interface is removed from the list of interfaces with multicast routers attached. The range is 0 to
3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
Default
Format
Mode

no set igmp mcrtrexpiretime

This command sets the Multicast Router Present Expiration time on the system to 0. A value of 0
indicates an infinite timeout, i.e. no expiration.
Format
Mode
how garp
s
This command displays Generic Attributes Registration Protocol (GARP) information.
Format
Mode
GMRP Admin Mode
GVRP Admin Mode

show gmrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or
all interfaces.
Format
Mode
Interface
8-52
0
set igmp mcrtexpiretime <0-3600>
Global Config
no set igmp mcrtexpiretime
Global Config

show garp

Privileged EXEC and User EXEC
This displays the administrative mode of GARP Multicast Regis-
tration Protocol (GMRP) for the system.
This displays the administrative mode of GARP VLAN Registra-
tion Protocol (GVRP) for the system.
show gmrp configuration {<slot/port> | all}
Privileged EXEC and User EXEC
This displays the slot/port of the interface that this row in the
table describes.
December 2004, 202-10010-02
Switching Commands