Set Igmp Mcrtrexpiretime - NETGEAR ProSafe GSM7224P User Manual

Format
set igmp maxresponse <vlan_id> <1-25>
Mode
VLAN Config
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
Format
no set igmp maxresponse
Mode
• Global Config
• Interface Config
Format
no set igmp maxresponse <vlan_id>
Mode
VLAN Config

set igmp mcrtrexpiretime

This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Default
0
Format
set igmp mcrtrexpiretime <0-3600>
Mode
• Global Config
• Interface Config
Format
set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode
VLAN Config
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format
no set igmp mcrtrexpiretime
Mode
• Global Config
• Interface Config
Format
no set igmp mcrtrexpiretime <vlan_id>
Mode
VLAN Config
ProSafe Managed Switch
Switching Commands
164