Set Igmp Mcrtrexpiretime; No Set Igmp Mcrtrexpiretime; Show Igmpsnooping - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system. This is the amount
of time in seconds that a switch will wait for a query to be received on an interface before the
interface is removed from the list of interfaces with multicast routers attached. The range is 0 to
3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
Default
Format
Mode
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system to 0. A value of 0
indicates an infinite timeout, i.e. no expiration.
Format
Mode
how igmpsnooping
s
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled. Status information is only displayed when IGMP
Snooping is enabled.
Format
Mode
Admin Mode
Group Membership Interval
Max Response Time
Multicast Router Present Expiration Time
Interfaces Enabled for IGMP Snooping
8-108
0
set igmp mcrtrexpiretime <0-3600>
Global Config
no set igmp mcrtrexpiretime
Global Config
show igmpsnooping
Privileged EXEC
This indicates whether or not IGMP Snooping is active on the switch.
This displays the IGMP Query Interval Time. This is the amount of time a
switch will wait for a report for a particular group on a particular interface
before it sends a query on that interface. This value may be configured
This displays the amount of time the switch will wait after sending a query on an
interface because it did not receive a report for a particular group on that inter-
face. This value may be configured.
If a query is not received on an interface within this
amount of time, the interface is removed from the list of interfaces with multi-
cast routers attached. This value may be configured.
This is the list of interfaces on which IGMP Snooping is
enabled.
202-10088-01, March 2005
Switching Commands
Advertisement
Table of Contents
