Native-Vlan-Id - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

native-vlan-id

native-vlan-id number;
Syntax
Hierarchy Level [edit interfaces ge-fpc/pic/port]
Statement introduced in JUNOS Release 8.3.
Release Information
For 1-, 4-, and 8-port Gigabit Ethernet IQ2 and IQ2-E PICs, for 1-port 10-Gigabit
Description
Ethernet IQ2 and IQ2-E PICs configured for 802.1Q flexible VLAN tagging, for all
Ethernet interfaces on MX Series routers, and for aggregated Ethernet interfaces on
IQ2 and IQ2-E PICs or MX Series DPCs, configure mixed tagging support for untagged
packets on a port. When the
flexible-vlan-tagging statement, untagged packets are accepted on the same mixed
VLAN-tagged port.
The logical interface on which untagged packets will be received must be configured
with the same native VLAN ID as that configured on the physical interface. To
configure the logical interface, include the
statement on the physical interface) at the
logical-unit-number]
When the
untagged packets are accepted and forwarded within the bridge domain that is
configured with the matching VLAN ID.
Options number
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1288
native-vlan-id
native-vlan-id
hierarchy level.
statement is included with the interface-mode the statement,
native-vlan-id
—VLAN ID number.
Configuring Mixed Tagging Support for Untagged Packets on page 623
Configuring a Logical Interface for Access Mode on page 639
flexible-vlan-tagging on page 1130
statement is included with the
statement (matching the
vlan-id
[edit interfaces interface-name unit
native-vlan-id