Renesas H8S Series Hardware Manual page 361

Bit Bit Name Initial Value
5 ORER 0
4 FER 0
3 PER 0
Section 14 Serial Communication Interface (SCI)
R/W Description
R/W Overrun Error
[Setting condition]
•
When the next serial reception is completed while
RDRF = 1
[Clearing condition]
•
When 0 is written to ORER after reading ORER = 1
R/W Framing Error
[Setting condition]
•
When the stop bit is 0
[Clearing condition]
•
When 0 is written to FER after reading FER = 1
In 2-stop-bit mode, only the first stop bit is checked.
R/W Parity Error
[Setting condition]
•
When a parity error is detected during reception
[Clearing condition]
•
When 0 is written to PER after reading PER = 1
Rev. 6.00 Mar 15, 2006 page 325 of 570
REJ09B0211-0600