Renesas H8S Series Hardware Manual page 230

Section 10 16-Bit Timer Pulse Unit (TPU)
Bit Bit Name Initial value
1 TGFB 0
0 TGFA 0
Rev. 6.00 Mar 15, 2006 page 194 of 570
REJ09B0211-0600
R/W Description
R/(W) Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB
input capture or compare match. Only 0 can be
written, for flag clearing.
[Setting conditions]
•
When TCNT = TGRB and TGRB is functioning as
output compare register
•
When TCNT value is transferred to TGRB by input
capture signal and TGRB is functioning as input
capture register
[Clearing conditions]
•
When DTC is activated by TGIB interrupt and the
DISEL bit of MRB in DTC is 0
•
When 0 is written to TGFB after reading TGFB = 1
R/(W) Input Capture/Output Compare Flag A
Status flag that indicates the occurrence of TGRA
input capture or compare match. Only 0 can be
written, for flag clearing.
[Setting conditions]
•
When TCNT = TGRA and TGRA is functioning as
output compare register
•
When TCNT value is transferred to TGRA by input
capture signal and TGRA is functioning as input
capture register
[Clearing conditions]
•
When DTC is activated by TGIA interrupt and the
DISEL bit of MRB in DTC is 0
•
When 0 is written to TGFA after reading TGFA = 1