Suzuki Baleno Manual page 1475

EXHAUST MANIFOLD
1. Exhaust No.1 pipe
1. Exhaust manifold
3. Oxygen sensor coupler
cover
(if equipped)
2. Clamp
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-15
WARNING:
To avoid danger of being burned, do not service exhaust
system while it is still hot. Service should be performed
after system cools down.
REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect exhaust No.1 pipe from exhaust manifold.
3) Disconnect oxygen sensor coupler and release its clamps (if
equipped).
4) Remove exhaust manifold covers.
1. Exhaust manifold
2. Engine hook
3. Exhaust manifold cover
4. Oxygen sensor (if equipped)
5. Exhaust manifold gasket
6. Exhaust No.1 pipe gasket
7. Exhaust No.1 pipe
8. Exhaust manifold stiffener
9. Exhaust manifold lower cover