6A1-18 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
1. Pulley bolt
1. Timing belt
2. Tensioner plate
3. Tensioner bolt
8) Remove crankshaft pulley by removing 5 pulley bolts.
9) Release harness clamps.
10) Remove timing belt outside cover.
11) For installation of timing belt, align 4 timing marks as shown in
1. "V" mark on cylinder
head cover
2. Timing mark by "E"
on camshaft timing
belt pulley
3. Arrow mark on oil
pump case
4. Punch mark on
crankshaft timing belt
pulley
12) Remove timing belt tensioner, tensioner plate, tensioner
4. Tensioner
stud
5. Spring
figure by turning crankshaft.
spring and timing belt.