Raisecom
Gazelle S1020i-LI (A) User Manual
2.7.3 Ethernet cable
Introduction
The Ethernet cable is for connecting Ethernet electrical interfaces with other devices.
The Ethernet interface on the Gazelle S1020i-LI is adaptive to straight-through cable mode
and crossover cable mode.
Make the Ethernet cable on site as required. Use the STP cable.
Appearance
Figure 2-14 shows the Ethernet cable.
Figure 2-14 Ethernet cable
Technical specifications
The Ethernet cables have two types:
Table 2-22 lists the wiring of EIA/TIA 568A and EIA/TIA 568B standards.
Table 2-22 Wiring of EIA/TIA 568A and EIA/TIA 568B standards
Connector (RJ45)
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
Straight-through cable: used to connect devices of different types, such as between a PC
and a switch, or between a switch and a router
Crossover cable: used to connect devices of the same type, such as between PCs,
between switches, between routers, or between a PC and a router (they are of the same
type)
White/Green
Green
White/Orange
Blue
White/Blue
Orange
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
EIA/TIA 568A
2 Hardware structure
EIA/TIA 568B
White/Orange
Orange
White/Green
Blue
White/Blue
Green
26