Button; Figure 2-35 Mode Button On The Panel - Raisecom ISCOM2600 (B) Series Product Description

Raisecom
ISCOM2600 (B) Series Product Description
USB
MST
STK
POE

2.4 Button

There is a button on the front panel of the ISCOM2600-28X-PWR and ISCOM2600-28X-
PWH, which is used to switch the LED displaying mode, as shown in Figure 2-35.

Figure 2-35 Mode button on the panel

Table 2-9 describes the Mode button.
LED Status
Green USB interface working LED




Green ISF master/slave LED


Green ISF status LED


Green PoE status LED


Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Green: USB deployment is successful. The USB interface is
connected properly.
Fast blinking: the USB interface is transmitting data.
Slow blinking: USB deployment fails.
Off: the USB interface is disconnected, which is the default
status.
Green: the device is the master in the ISF.
Off: the device is the slave in the ISF, or it is not in an ISF.
Green: the device is in the ISF mode.
Off: the device is not in the ISF mode.
Green: the service downlink interface (1–24) LED is in the
PoE status.
Off: the service downlink interface (1–24) LED is in the
working status.
Description
2 System structure
30