Defaults
Clear per-queue rate-limiting counters for all control-plane and port traffic.
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
Usage
To display the per-queue counters of rate-limited control-plane traffic at the
Information
aggregated (switch) or line card and port set level, use the show control-
traffic queue command.
Example
Dell#clear control-traffic queue 2 counters
Dell#
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Z9500
Syntax
control-plane-cpuqos
Defaults
Not configured.
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control Plane Policing (CoPP)
•
Queues 16 to 23 process packets destined to the line
card CPU.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
563