Show System - Dell S4810 Reference Manual

LACP
DHCP
V6RAD
Unidentified Client0 0x006e0002 0x00000000 0x00000000
0x00000000 0
Dell#

show system

Display the status of all stack members or a specific member.
S4810
Syntax
show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief
stack-unit unit-
id
stack-ports
status |
topology
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.11.4
148
0 0x00000000 0x00000000 0x8000383f 0x00000000 35
0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
0 0x00000433 0x00030000 0x00000000 0x00000000 0
(OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
(OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member. The unit
ID range for the S4810 is from 0 to 11.
(OPTIONAL) Enter the keywords stack-ports for
information about the status or topology of the S4810 stack
ports.
EXEC
EXEC Privilege
Added support for the disabled-ports parameter .
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-type
NOTE: This option applies to the S4810 or S4820T
system only.
Control and Monitoring