Keithley 4200A-SCS Reference Manual page 287

Section 6: Clarius
To import a project:
1. In Clarius, select My Projects.
2. Select Import. The Import To My Projects dialog box opens.
3. Select the exported file.
4. Select Import. The Project Information Editor opens.
5. In the Basic tab, complete the information as needed. Refer to the table below for the options.
6. Select the Filters tab. These options set the filters that will cause this item to appear in the library
when you select the right-pane filters.
7. Select the filters that help a user find this item in the library.
8. Select the Keywords tab. These options determine what you can type in the library Search field
to locate this item. You can use the Sort By options at the bottom of the lists to change the order
of the entries in the Information Editor. It does not affect the order in the library.
9. Drag a keyword from the left to the right to add a keyword.
10. To remove a keyword, select the keyword and select Delete. This does not remove the keyword
from the Global Keywords list.
11. To add a keyword, select New and type the keyword.
12. Select Add To My Projects to add the new object to the library.
13. To open the new project, select the project and select Open Project.
Options in the Information Editor
Preview
Name
Title
Description
Author
Help
Include Help
Library Image
6-18
Displays the changes you make as they will appear in the library.
Type the new name. This is the name that is used in the library and the project tree.
Type the title. This is used in the library.
Type a brief description of the item. This is displayed in the library.
Type information that identifies who created this item. This is available only through the
Library Information Editor.
Only editable when adding an object from the project tree to the library. This is the help
file that is displayed in the right pane when Configure or Analyze is selected. It is also
displayed when the item is selected in the library.
Only displayed when you add an item from the project tree to the library. Determines if
the existing help is included with the new item. If you want to include the help that was
associated with the original object, select Include Help. Clear Include Help to keep the
help from displaying (the Help pane will be blank). You cannot change the help link; you
can only include or hide it.
The image that is displayed in the library. Click the image to select a different image.
Images should be 400x400 pixels in png format. Larger images display, but anything
larger than 400x400 is cut off in the library display.
To re-use an image from an older project, you may need to save the existing bmp image
to png format. You can use a tool such as Microsoft
To leave the image area blank, select Clear.
Model 4200A-SCS Parameter Analyzer Reference Manual
®
Paint to convert the image.
4200A-901-01 Rev. C / February 2017