Keithley 4200A-SCS Reference Manual page 272

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Touch screen basics

You can operate the 4200A-SCS using the touch screen. You can use your fingers, clean room

gloves, or a stylus.

To select and move on the screen:

To scroll, swipe up or down on the screen.

To select an item, touch it on the screen.

To double-click an item, touch it twice.

To right-click an item, touch and hold, then release to see the options.

To enter information, you can use the on-screen keyboard. Swipe from the left side of the display to

open the keyboard.

The touch screen uses standard Microsoft

actions, refer to the Microsoft help information, available from the on-screen keyboard window menu

option Tool > Help Topics.

You can also adjust the touch settings using the Pen and Touch options in the Windows Control

Choose the project phase

The options on the left side of the top pane of Clarius determine which phase of the project you are

working on and allow you to select options to support your tests.

Select displays the libraries, which you can use to add existing projects, tests, devices, actions, and

wafer plans to your project. You can also create your own tests, actions, and projects.

Configure displays the parameters for the item you selected in the project tree. For example, if you

selected a test, the parameters for each terminal of the test and the entire test are available.

Analyze displays the results of the tes. You can also access analysis tools to explore and export your

4200A-901-01 Rev. C / February 2017

Figure 211: Select, Configure, and Analyze

touch actions. For additional information on the

Section 6: Clarius