Clarius Interface - Keithley 4200A-SCS Reference Manual

Section 6: Clarius

Clarius interface

The Clarius interface allows you to:
•
Build and edit project and execution sequences.
•
Configure tests.
•
Execute tests and actions, such as switch matrix connections and prober movements, including:

A single test for one device (such as a transistor, diode, resistor, capacitor).

A test sequence for one device.

Test sequences for multiple devices. For example, test all the devices contacted by a prober
at a location on a semiconductor wafer.

The test sequences of an entire project, which may include multiple prober touchdowns for a
single semiconductor die
•
View test and analysis results.
•
Analyze test results using built-in parameter extraction tools.
6-2
Model 4200A-SCS Parameter Analyzer Reference Manual
Figure 210: Clarius interface
4200A-901-01 Rev. C / February 2017