Unpacking And Installation; Points To Note When Turning Off The Main Power; Unpacking; Installation Of The Scanner - Canon iR C3380 series Service Manual

Chapter 2

2.2 Unpacking and Installation

2.2.1 Points to Note When Turning Off the Main Power

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
How to Turn Off the Main Power
When turning off the main power, be sure to go through the following steps
to protect the hard disk:
1) Hold down the control panel power switch for 3 sec or more.
2) Follow the instructions on the shutdown sequence screen to let the main
power switch be ready to turn off.
3) Turn off the power switch.
4) Disconnect the power cables (for the power outlet).

2.2.2 Unpacking

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
MEMO:
When installing the Plain pedestal/Cassette pedestal, be sure to place the
main body on the Plain pedestal/Cassette pedestal. (For installation of the
Plain pedestal/Cassette pedestal, see the Installation Procedure.)
1) Unpack the main body.
2) Hold the 4 grips [1] (left, right), and lift the machine off the skid [2].
The machine weighs a maximum of about 125 kg (including a DADF). Be
sure to work in a group of 4 persons when lifting it.
Also, lift the main body while keeping it level.
[1]
3) Remove all the tapes from the main body.

2.2.3 Installation of the Scanner

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Open the copyboard or the DADF to remove the copyboard glass
protection pad.
2) Remove the scanning system fixing screw [1] found at the external side of
the reader right cover (Take care to keep the scanning system fixing screw
in preparation for shifting the machine).
2-4
[2]
[1]
F-2-6
0013-8256

2.2.4 Installation of the Drum Cartridge

0013-8244
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Open the front cover [1].
2) Press the claw down [1], and detach the handle cover [2].
3) Press the release lever [1] to open the lower right cover [2] of the host
machine.
4) Remove 4 tapes and the protection sheet [3] attached to the duplexing unit.
For taking in/out of the process unit, make sure to do with the duplexing unit
0013-8246
[4] open.
[1]
F-2-7
[1]
F-2-8
[1]
[2]
F-2-9
0013-8248