Figure 1-23 Installing The Aep Cover; Table 1-9 Alarm Input Pin Assignments - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 1 Install the Shelf and Common Control Cards
Figure 1-23
Insert and tighten the eight screws to secure the AEP cover to the AEP.
Step 2
Connect the cables from the external wire-wrap panel to the AMP Champ connectors on the AEP.
Step 3
Table 1-9
Table 1-9
AMP Champ Pin
1
2
3
4
5
6
7
8
9
10
11
12
August 2005
Installing the AEP Cover
lists the alarm input pin assignments.
Alarm Input Pin Assignments
Signal Name
ALARM_IN_1–
GND
ALARM_IN_3–
ALARM_IN_5–
GND
ALARM_IN_7–
ALARM_IN_9–
GND
ALARM_IN_11–
ALARM_IN_13–
GND
ALARM_IN_15–
NTP-G11 Install an External Wire-Wrap Panel on the AEP (ANSI Only)
AMP Champ Pin Signal Name
27 GND
28 ALARM_IN_2–
29 ALARM_IN_4–
30 GND
31 ALARM_IN_6–
32 ALARM_IN_8–
33 GND
34 ALARM_IN_10–
35 ALARM_IN_12–
36 GND
37 ALARM_IN_14–
38 ALARM_IN_16–
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
1-59