DLP-G219 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for SONET or SDH Payloads
Table 5-6
TXP_MR_10G and TXP_MR_10E Transponder Card Line Threshold Settings (continued)
Parameter Description
SES
Severely
errored
seconds
SEFS
(Section only)
Severely
errored
framing
seconds
FC
Failure count
UAS
Unavailable
seconds
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
5-20
Options – ONS 15454
Numeric. Threshold display options include:
•
Direction—Near End or Far End
Interval—15 Min (minutes) or 1 day
•
Types—Line or Section (near end only)
•
Choose an option in each category and click
Refresh.
Numeric. Can be set for Far End for 15-minute
or one-day intervals for Section only. Choose
an interval option and click Refresh.
Numeric. Threshold display options include:
Direction—Near End or Far End
•
Interval—15 Min (minutes) or 1 day
•
Types—Line or Section (near end only)
•
Choose an option in each category and click
Refresh.
Numeric. Threshold display options include:
Direction—Near End or Far End
•
Interval—15 Min (minutes) or 1 day
•
Types—Line or Section (near end only)
•
Choose an option in each category and click
Refresh.
Chapter 5
Provision Transponder and Muxponder Cards
Options – ONS 15454 SDH
Numeric. Threshold display options include:
•
Direction—Near End or Far End
Interval—15 Min (minutes) or 1 day
•
Types—Multiplex Section or
•
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
Numeric. Can be set for Far End for 15-minute
or one-day intervals for Regeneration Section
only. Choose an interval option and click
Refresh.
Numeric. Threshold display options include:
Direction—Near End or Far End
•
Interval—15 Min (minutes) or 1 day
•
Types—Multiplex Section or
•
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
Numeric. Threshold display options include:
Direction—Near End or Far End
•
Interval—15 Min (minutes) or 1 day
•
Types—Multiplex Section or
•
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
September 2005