Table 5-49 Mxp_Mr_2.5G And Mxpp_Mr_2.5G Card Client Interface Alarm Thresholds - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 5 Provision Transponder and Muxponder Cards
Table 5-48
Port Type
(by CTC)
FICON2G 15454-SFP-GEFC-SX
ONE_GE
Repeat Steps
Step 5
Under Types, click the Alarm radio button and click Refresh.
Step 6
Referring to
Step 7
High, RX Power Low, TX Power High, and TX Power Low based on the client interface that is
provisioned.
Note
Table 5-49
Port Type
(by CTC)
FC1G
FC2G
FICON1G 15454-SFP-GEFC-SX
FICON2G 15454-SFP-GEFC-SX
September 2005
DLP-G308 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Client Port Alarm and TCA Thresholds
MXP_MR_2.5G and MXPP_MR_2.5G Card Client Interface TCA Thresholds (continued)
Pluggable Port
Module (XFP)
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
15454-SFP-GEFC-SX
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
3 and 4 to provision each additional client port.
Table 5-49, provision the client port (Ports 1 through 8) Alarm thresholds for RX Power
You must modify 15 Min and 1 Day independently. To do so, choose the appropriate radio button
and click Refresh.
MXP_MR_2.5G and MXPP_MR_2.5G Card Client Interface Alarm Thresholds
Pluggable Port
Module (XFP)
15454-SFP-GEFC-SX
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
15454-SFP-GEFC-SX
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
15454E-SFP-GEFC-S
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
TCA RX TCA RX
Power Low Power High
–17 0
–20 –3
–17 0
–20 –3
Alarm RX Alarm RX
Power Low Power High
–20 3
–23 0
–18 3
–23 0
–20 3
–23 0
–20 3
–23 0
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
TCA TX TCA TX
Power Low Power High
–16 3
–16 3
–16 3
–16 3
Alarm TX Alarm TX
Power Low Power High
–13 –1
–13 0
–13 –1
–13 0
–13 –1
–13 0
–13 –1
–13 0
5-81