Dlp- G11 Open The Fmec Cover - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G11 Open the FMEC Cover
Step 3 Continue with the
page
Stop. You have completed this procedure.
DLP-G11 Open the FMEC Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Unscrew the screws on the FMEC cover
Step 1
Figure 1-9
Screws
Use the handles to pull the cover forward.
Step 2
Step 3 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
1-24
"NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only)" procedure on
1-28.
This task opens the FMEC cover. The FMEC cover must be opened to
install the MIC-A/P and the MIC-C/T/P.
Medium slot-head screwdriver
DLP-G9 Open the Front Cabinet Compartment (Door), page 1-20
Required
Onsite
None
Unscrewing the FMEC Cover
F A N
F A IL
C R
IT
M A
J
M IN
Chapter 1
(Figure 1-9).
C I S
C O
O p
O N
ti c a
S 1
l N
e tw 5 4 5
o r k 4
S y
s te
m
Install the Shelf and Common Control Cards
August 2005