Figure 17-22 Passive Hybrid Terminal Example; Hybrid Oadm Node - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:

Table of Contents

Node Reference

Figure 17-22

Passive Hybrid Terminal Example

17.2.4 Hybrid OADM Node

A hybrid OADM node is a single ONS 15454 node equipped with at least one AD-xC-xx.x card or one

AD-xB-xx.x card, and two TCC2/TCC2P cards. The hybrid OADM node type is based on the DWDM

OADM node type described in the

"17.1.3 OADM Node" section on page

17-4. TDM cards can be

installed in any available slot. Review the plan produced by MetroPlanner to determine slot availability.

Figure 17-23

shows an example of an amplified hybrid OADM node configuration. The hybrid OADM

node can also become passive by removing the amplifier cards.

Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0

Chapters

Table of Contents