Dlp- G38 Run The Ctc Installation Wizard For Unix - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G38 Run the CTC Installation Wizard for UNIX
Step 13 Click Finish.
Return to your originating procedure (NTP).
Step 14
DLP-G38 Run the CTC Installation Wizard for UNIX
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Note If you will log into nodes running CTC software earlier than Software R4.6, uninstall JRE 1.4.2 and
reinstall JRE 1.3.1_2. To run Software R4.7, R5.0, or R6.0, uninstall JRE 1.3.1_2 and reinstall JRE
1.4.2.
JRE 1.4.2 requires Netscape 7.x or Internet Explorer 6.x.
Note
Verify that your computer has the following:
Step 1
•
•
•
Change the directory. Type:
Step 2
cd /cdrom/cdrom0/
From the techdoc454 CD directory, type:
Step 3
./setup.bat
The Cisco Transport Controller Installation Wizard displays the components that will be installed on
your computer:
•
•
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
2-6
This task installs the CTC online user manuals, Acrobat 6.0.1, and
JRE 1.4.2 on UNIX workstations, as necessary. JRE 1.4.2 is required to
run Release 6.0.
Cisco ONS 15454 Release 6.0 software CD
This task is required if you will use a UNIX workstation to run CTC and
any of the following are true:
•
•
Onsite or remote
None
RAM—384 MB recommended, 512 MB optimum
Hard drive—20 GB hard drive recommended with at least 50 MB of space available
Operating system—Solaris 8 or 9
Note These requirements are guidelines. CTC performance is faster if your computer has a faster
processor and more RAM.
Java Runtime Environment 1.4.2
Acrobat Reader 6.0.1
JRE 1.4.2 is not installed.
CTC online user manuals are not installed and are needed.
Chapter 2 Connect the PC and Log into the GUI
September 2005