Dlp- G117 Change The Maximum Number Of Session Entries For Alarm History - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 8 Manage Alarms
c.
d.
Return to your originating procedure (NTP).
Step 5
DLP-G117 Change the Maximum Number of Session Entries for Alarm History
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Edit menu, choose Preferences.
Step 1
The CTC Preferences dialog box appears
September 2005
Click the History > Session tab to view the alarm messages raised during the current session.
Click the History > Card tab to retrieve all available alarm messages for the card and click
Retrieve.
If you check the Alarms check box, the node's alarm history appears. If you check the Events check
box, the Not Alarmed and transient event history appears. If you check both boxes, node history for
both alarms and events appears.
The ONS 15454 can store up to 640 critical alarm messages, 640 major alarm messages,
Note
640 minor alarm messages, and 640 condition messages. When any of these limits is
reached, the ONS 15454 discards the oldest events in that category.
Raised and cleared alarm messages (and events, if selected) appear.
This task changes the maximum number of session entries included in the
alarm history. Use this task to expand the history list to save information
for future reference or troubleshooting.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
DLP-G117 Change the Maximum Number of Session Entries for Alarm History
(Figure 8-3).
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
8-9