Cisco ONS 15454 DWDM Installation And Operation Manual page 10

Contents
Turn Up Network
6
C H A P T E R
Create Channels and Circuits
7
C H A P T E R
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
x
DLP- G237 Change Distance Extension Settings for MXP_MR_2.5G and MXPP_MR_2.5G
Cards
5-69
DLP- G238 Change OC-48/STM-16 Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards
DLP- G239 Change Section Trace Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards
DLP- G240 Change MXP_MR_2.5G and MXPP_MR_2.5G Card Line Threshold Settings for SONET or
SDH Payloads
5-74
DLP- G321 Change the MXP_MR_2.5G or MXPP_MR_2.5G Card Line Thresholds for 1G Ethernet or
1G FC/FICON Payloads
DLP- G307 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Trunk Port Alarm and TCA
Thresholds
5-79
DLP- G308 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Client Port Alarm and TCA
Thresholds
5-80
6-1
Before You Begin
6-1
NTP- G51 Verify DWDM Node Turn-Up
NTP- G52 Verify Node-to-Node Connections
NTP- G53 Set Up Timing
DLP- G95 Set Up External or Line Timing
DLP- G96 Set Up Internal Timing
NTP- G54 Provision and Verify a DWDM Network
DLP- G99 Create a Provisionable Patchcord
NTP- G56 Verify the OSNR
NTP- G142 Perform a Protection Switch Test
NTP- G57 Create a Logical Network Map
Before You Begin
7-1
NTP- G58 Locate and View Optical Channel Network Connections
DLP- G100 Search for Optical Channel Network Connections
DLP- G101 View Optical Channel Network Connection Information
DLP- G102 Filter the Display of Optical Channel Network Connections
DLP- G103 View Optical Channel Network Connections on a Span
NTP- G59 Create and Delete Optical Channel Network Connections
DLP- G104 Assign a Name to a Port
DLP- G105 Provision DWDM Optical Channel Network Connections
DLP- G106 Delete Optical Channel Network Connections
NTP- G60 Create Overhead Circuits
DLP- G76 Provision GCC Terminations
5-77
6-2
6-3
6-4
6-4
6-7
6-8
6-11
6-12
6-13
6-15
7-1
7-10
7-13
7-14
7-2
7-2
7-3
7-7
7-8
7-9
7-10
7-12
5-71
5-73
August 2005