Figure 2-2 Login Node Group - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 2 Connect the PC and Log into the GUI
Step 2 Click Login Node Group and Create Group.
Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Step 3
In the Members area, type the IP address (or node name) of a node you want to add to the group. Click
Step 4
Add. Repeat this step for each node that you want to add to the group.
Step 5 Click OK.
The next time you log into an ONS 15454, the login node group will be available in the Additional Nodes
list of the Login dialog box. For example, in
IP addresses for Nodes 1, 4, and 5. During login, if you choose this group from the Additional Nodes
list and Disable Network Discovery is not selected, all nodes in the figure appear. If the login group and
Disable Network Discovery are both selected, only Nodes 1, 4, and 5 appear. You can create as many
login node groups as you need. The groups are stored in the CTC preferences file and are not visible to
other users.
Figure 2-2
192.168.106.143
Node 2
Return to your originating procedure (NTP).
Step 6
September 2005
Login Node Group
Laptop PC
IP Address
192.168.106.100
Node 1
IP Address
192.168.105.119
Three node ring
Node 3
Figure 2-2, a login node group is created that contains the
LAN/WAN (Ethernet)
Node 4
IP Address
192.168.104.109
Single
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
DLP-G48 Create Login Node Groups
Node 5
IP Address
Two node ring
Node 6
IP Address
192.168.103.199
2-29