Cisco ONS 15454 DWDM Installation And Operation Manual page 390

DLP-G230 Change Line Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards
Table 5-30 TXP_MR_2.5G and TXPP_MR_2.5G Transponder Card Line Settings (continued)
Parameter Description
SD BER (OC-N and STM-N payloads only) Sets the signal
degrade bit error rat.
AINS Soak (OC-N and STM-N payloads only) Sets the
automatic in-service soak period.
Type (OC-N and STM-N payloads only) The optical
transport type.
Reach Displays the optical reach distance of the client port.
Wavelength Displays the wavelength of the client port.
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
5-52
Chapter 5 Provision Transponder and Muxponder Cards
Options
• 1E-5
• 1E-6
1E-7
•
1E-8
•
1E-9
•
Duration of valid input signal, in hh.mm format,
•
after which the card becomes in service (IS)
automatically
0 to 48 hours, 15-minute increments
•
SONET
•
• SDH
Autoprovision (default)
•
• I1
S1
•
S2
•
L1
•
L2
•
L3
•
First Tunable Wavelength
•
Further wavelengths:1310 nm to 1550 nm
•
100-GHz ITU spacing, CWDM spacing
Supported wavelengths are marked by asterisks
•
(**)
September 2005