Cisco ONS 15454 DWDM Installation And Operation Manual page 66

Document Objectives
Document Objectives
This document explains installation, turn up, provisioning, and maintenance for Cisco ONS 15454 dense
wavelength division (DWDM) systems. Use this document in conjunction with the appropriate
publications listed in the
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware
and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and
preferably have experience as a telecommunications technician.
Document Organization
The Cisco ONS 15454 DWDM Installation and Operations Guide, Release 4.7 is organized into the
following chapters:
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
lxvi
Related Documentation
Chapter 1, "Install the Shelf and Common Control Cards"
ONS 15454 ANSI and ETSI shelves and common control cards including the TCC2 and AIC/AIC-I.
Chapter 2, "Connect the PC and Log into the GUI"
Transport Controller (CTC), set up a computer for different connection types, and log into the
Cisco ONS 15454.
Chapter 3, "Turn Up a Node"provides procedures for node turn up and DWDM card installation.
Chapter 4, "Perform Node Acceptance Tests"
Chapter 5, "Provision Transponder and Muxponder Cards"
settings and provision pluggable port modules (PPMs) for transponder (TXP) and muxponder
(MXP) cards.
Chapter 6, "Turn Up Network"
Chapter 7, "Create Channels and Circuits"
connections (OCHNCs) and overhead circuits.
Chapter 8, "Manage Alarms"explains how to document existing node data, view and delete alarms,
view alarm-affected circuits and LCD alarm counts, manage alarm profiles, filter alarms, suppress
alarms, and provision external alarms.
Chapter 9, "Monitor Performance"
display, monitor performance, and manage remote monitoring (RMON) thresholds.
Chapter 10, "Manage the Node"
15454 and perform common management tasks such as monitoring the DWDM automatic power
control and span loss values.
Chapter 11, "Change DWDM Card Settings"
(PM), and threshold settings on Cisco ONS 15454 cards.
Chapter 12, "Add and Remove Cards and Nodes"
nodes.
Chapter 13, "Maintain the Node"
Cisco ONS 15454, including procedures for editing, importing, and exporting network element
defaults.
section.
includes procedures to install the Cisco
provides acceptance tests for each DWDM node type.
explains how to turn up and test a DWDM network.
explains how to create DWDM optical channel network
provides procedures to change the performance monitoring (PM)
explains how to modify node provisioning for the Cisco ONS
explains how to change line, performance monitoring
explains how to add and remove DWDM cards and
provides hardware and software maintenance procedures for the
provides procedures for installing Cisco
explains how to change transmission
About this Guide
August 2005