Cisco ONS 15454 DWDM Installation And Operation Manual page 83

Chapter 1 Install the Shelf and Common Control Cards
Required Tools and Equipment (ANSI)
You need the following tools and equipment to install and test the ONS 15454 ANSI shelf assembly.
Cisco-Supplied Materials (ANSI)
The following materials are required and are shipped with the ONS 15454 ANSI shelf (wrapped in
plastic). The number in parentheses gives the quantity of the item included in the package.
•
•
•
•
•
•
•
•
•
•
•
User-Supplied Materials (ANSI)
The following materials and tools are required but are not supplied with the ONS 15454 ANSI:
•
•
•
•
•
•
•
•
August 2005
#12-24 x 3/4 pan-head Phillips mounting screws (48-1004-XX, 48-1007-XX) (8)
#12 -24 x 3/4 socket set screws (48-1003-XX) (2)
T-handle #12-24 hex tool for set screws (1)
ESD wrist strap with 1.8 m (6 ft) coil cable (1)
Tie wraps (10)
Pinned hex (Allen) key for front door (1)
Spacers (50-1193-XX) (4)
Spacer mounting brackets (2)
Sheet metal backplane cover (installed) (1)
External (bottom) brackets for the fan-tray air filter
Standoff kit (53-0795-XX):
Plastic fiber management guides (2)
–
Fan filter bracket screws (53-48-0003) (6)
–
One or more of the following equipment racks:
– 19-inch ANSI Standard (Telcordia GR-63-CORE) (482.6 mm) rack; total width 22 inches
(558.8 mm)
23-inch ANSI Standard (Telcordia GR-63-CORE) (584.2 mm) rack; total width 26 inches
–
(660.4 mm)
Fuse panel
Power cable (from fuse and alarm panel to assembly), #10AWG, copper conductors,
194 degrees Fahrenheit (90 degrees Celsius)
Ground cable #6AWG stranded
Alarm cable pairs for all alarm connections, #22 or #24 AWG (0.51 mm² or 0.64 mm²), solid tinned
100-ohm shielded BITS clock cable pair #22 or #24 AWG (0.51 mm² or 0.64 mm²), twisted-pair
T1-type
Single-mode SC fiber jumpers with UPC polish (55 dB or better) for optical (OC-N) cards
Shielded coaxial cable terminated with SMB or BNC connectors for DS-3 cards
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
Required Tools and Equipment (ANSI)
1-3