Chapter 5
Provision Transponder and Muxponder Cards
Table 5-32
Parameter
Port
CV
ES
SES
SEFS
FC
UAS
Click Apply.
Step 4
Step 5
Return to your originating procedure (NTP).
September 2005
DLP-G232 Change TXP_MR_2.5G and TXPP_MR_2.5G Cards Line Threshold Settings for SONET or SDH Payloads
TXP_MR_2.5G and TXPP_MR_2.5G Transponder Card Line Thresholds Settings
for OC-3/STM-1, OC-12/STM-4, and OC-48/STM-16 Payloads
Description
(Display only) Port number
Coding violations
Errored seconds
Severely errored seconds
(Section only) Severely errored framing
seconds
(Line only) Failure count
(Line only) Unavailable seconds
Options
1
•
2
•
3 (TXPP_MR_2.5G card only)
•
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Far End, for
15-minute or one-day intervals for
Section only. Select the bullet and click
Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals
for Line only. Select the bullet and click
Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
for Line only. Select the bullet and click
Refresh.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
5-55