Dlp- G192 Change User Password And Security Level For Multiple Nodes - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 10 Manage the Node
DLP-G192 Change User Password and Security Level for Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
You must add the same user name and password to each node that the user will access.
Note
From the View menu, choose Go to Network View. Verify that you can access all the nodes where you
Step 1
want to change the users.
Click the Provisioning > Security > Users tabs. Highlight the user's name whose settings you want to
Step 2
change.
Click Change. The Change User dialog box appears.
Step 3
In the Change User dialog box, you can:
Step 4
•
•
•
See the
Step 5 In the Select Applicable Nodes area, uncheck any nodes where you do not want to change the user's
settings (all network nodes are selected by default).
Click OK. A Change Results confirmation dialog box appears.
Step 6
Click OK to acknowledge the changes.
Step 7
Step 8 Return to your originating procedure (NTP).
September 2005
This task changes settings for an existing user at multiple nodes.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
Change a user's password.
Modify the user's security level.
Lock out the user.
"DLP-G55 Create a New User on Multiple Nodes" task on page 3-7
DLP-G192 Change User Password and Security Level for Multiple Nodes
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
for field descriptions.
10-51