Ntp- G85 Modify Or Delete Osc Terminations, Gcc Terminations, And Provisionable Patchcords - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 10 Manage the Node
NTP-G85 Modify or Delete OSC Terminations, GCC Terminations,
and Provisionable Patchcords
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Deleting an OSC termination can cause you to lose visibility of nodes that do not have other OSCs or
Caution
network connections to the CTC computer.
Step 1 Complete the
Step 2.
Step 2 In node view, complete the following tasks as needed:
•
•
•
•
Stop. You have completed this procedure.
September 2005
NTP-G85 Modify or Delete OSC Terminations, GCC Terminations, and Provisionable Patchcords
This procedure modifies GCC terminations, and deletes provisionable
patchcords, OSC terminations, and GCC terminations.
None
DLP-G76 Provision GCC Terminations, page 7-14
NTP-G38 Provision OSC Terminations, page 3-84
DLP-G99 Create a Provisionable Patchcord, page 6-11
As needed
Onsite or remote
Provisioning or higher
"DLP-G46 Log into CTC" task on page
To modify a GCC termination, complete the
page 10-40.
To delete a GCC termination, complete the
page 10-40.
To delete an OSC termination, complete the
page 10-41.
To delete a provisionable patchcord, complete the
task on page 10-42.
2-25. If you are already logged in, continue with
"DLP-G184 Change a GCC Termination" task on
"DLP-G185 Delete a GCC Termination" task on
"DLP-G186 Delete an OSC Termination" task on
"DLP-G187 Delete a Provisionable Patchcord"
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
or
10-39