Dlp- G139 View Optical Service Channel Pm Parameters - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G139 View Optical Service Channel PM Parameters
•
•
•
Stop. You have completed this procedure.
DLP-G139 View Optical Service Channel PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the OSCM or OSC-CSM card where you want to view PM counts. The card
Step 1
view appears.
Step 2 Click the Performance > OC3 Line tabs
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
9-10
DLP-G276 View 4-Channel Multiplexer/Demultiplexer Optical Power Statistics, page 9-15
DLP-G142 View Channel Optical Add/Drop Multiplexer Power Statistics, page
DLP-G143 View Band Optical Add/Drop Multiplexer Power Statistics, page
To refresh, reset, or clear PM counts, see the
Note
on page 9-2.
This task enables you to view optical service channel (OSC) PM counts
at selected time intervals on an OSCM or OSC-CSM card and port to
detect possible performance problems.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Retrieve or higher
(Figure 9-1).
Chapter 9
9-18.
"NTP-G73 Change the PM Display" procedure
Monitor Performance
9-16.
September 2005