Cisco ONS 15454 DWDM Installation And Operation Manual page 598

DLP-G203 Change the OSCM and OSC-CSM ALS Maintenance Settings
Table 11-5
Parameter
VOA Degrade
High (dBm)
VOA Degrade
Low (dBm)
Click Apply. If the change affects traffic, a warning message displays. Click Yes to complete the
Step 6
change.
Return to your originating procedure (NTP).
Step 7
DLP-G203 Change the OSCM and OSC-CSM ALS Maintenance Settings
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the OSC-CSM or OSCM card where you want to change the ALS
Step 1
maintenance settings.
Click the Maintenance > ALS tabs.
Step 2
Modify any of the settings described in
Step 3
options column in the table.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
11-10
OSCM and OSC-CSM Cards Optical Channel Alarm Thresholds Settings (continued)
Description
Does not apply to OSCM and OSC-CSM
cards.
Does not apply to OSCM and OSC-CSM
cards.
This task changes the automatic laser shutdown (ALS) maintenance
settings for the OSC-CSM and OSCM cards.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
Table
Chapter 11
Options
—
—
11-6. The provisionable parameters are listed in the
Change DWDM Card Settings
September 2005