Repairing Circuits - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 13 Maintain the Node
Step 24 Read the instructions in the Circuit Repair dialog box
have been completed, click Next. Ensure that you have the old and new MAC addresses.
Figure 13-12
Step 25 The Node MAC Addresses dialog box appears
a. From the Node drop-down list, choose the name of the node where you replaced the AIP.
In the Old MAC Address field, enter the old MAC address that was recorded in
b.
Click Next.
c.
Figure 13-13
The Repair Circuits dialog box appears
Step 26
Finish.
September 2005

Repairing Circuits

Recording the Old MAC Address Before Replacing the AIP
(Figure
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
NTP-G117 Replace the ANSI Shelf Alarm Interface Panel
(Figure 13-12). If all the steps in the dialog box
(Figure 13-13):
13-14). Read the information in the dialog box and click
Step 3.
13-39