Mxp_Mr_10G; Dlp- G223 Change Line Settings For Mxp_2.5G_10G And Mxp_2.5G_10E Cards - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

DLP-G223 Change Line Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G223 Change Line Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Double-click the MXP_2.5G_10G or MXP_2.5G_10E card where you want to change the line settings.
Step 1
Click the Provisioning > Line > SONET (ANSI) or SDH (ETSI) tabs.
Step 2
Note
Modify any of the settings described in
Step 3
Note
Table 5-17
MXP_2.5G_10G or MXP_2.5G_10E Muxponder Card Line Settings
Parameter
Description
Port #
(Display only) Port number. Ports 1 to 4 are client
ports (OC-48/STM-16). Port 5 (TXP_2.5G_10G) is
the DWDM trunk (OC-192/STM-64) that provides
wavelength services.
Port Name
Provides the ability to assign the specified port a
logical name.
Admin State
Sets the port service state unless network
conditions prevent the change. For more
information about administrative states, see
Appendix C, "DWDM Administrative and Service
States."
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
5-34
This task changes the line settings for MXP_2.5G_10G or
MXP_2.5G_10E muxponder cards.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
The SONET tab appears only if you have created a PPM for a given port.
You must modify Near End, and Far End independently; 15 Min and 1 Day independently; and
Line and Section independently. To do so, choose the appropriate radio button and click Refresh.
Chapter 5
Table
5-17.
Options
1
2
3
4
5 (MXP_2.5G_10G only)
User-defined. Name can be up to 32 alphanumeric/
special characters. Blank by default.
See the
"DLP-G104 Assign a Name to a Port" task on
page
7-10.
IS (ANSI) or Unlocked (ETSI)
IS,AINS (ANSI) or Unlocked,automaticInService
(ETSI)
OOS,DSBLD (ANSI) or Locked,disabled (ETSI)
OOS,MT (ANSI) or Locked,maintenance (ETSI)
Provision Transponder and Muxponder Cards
September 2005

Advertisement

Table of Contents
loading

Table of Contents