Chapter 11 Change Dwdm Card Setting - Cisco ONS 15454 DWDM Installation And Operation Manual

NTP-G90 Modify OSCM and OSC-CSM Line Settings and PM Parameters and Thresholds
NTP-G90 Modify OSCM and OSC-CSM Line Settings and PM
Parameters and Thresholds
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
OSCM or OSC-CSM card settings. If you are already logged in, proceed to
Complete the
Step 2
Step 3 Perform any of the following tasks as needed:
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
DLP-G199 Change the OSCM and OSC-CSM Optical Service Channel Settings
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the OSCM or OSC-CSM card where you want to change the OC-3 optical
Step 1
line settings.
Click the Provisioning > OC3 Line > OC3 Line tabs.
Step 2
Modify any of the settings described in
Step 3
Options column in the table.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
11-2
This procedure changes the optical service channel (OC-3/STM-1) and PM
parameters and thresholds for the OSCM and OSC-CSM cards.
None
NTP-G30 Install the DWDM Cards, page 3-39
As needed
Onsite or remote
Provisioning or higher
"DLP-G46 Log into CTC" task on page 2-25
"NTP-G103 Back Up the Database" procedure on page
DLP-G199 Change the OSCM and OSC-CSM Optical Service Channel Settings, page 11-2
DLP-G200 Change the OSCM and OSC-CSM Optical Service Channel Thresholds, page 11-5
DLP-G201 Change Optical Line Parameters for OSCM and OSC-CSM Cards, page 11-6
DLP-G202 Change the OSCM and OSC-CSM Optical Line Threshold Settings, page 11-8
DLP-G203 Change the OSCM and OSC-CSM ALS Maintenance Settings, page 11-10
"NTP-G103 Back Up the Database" procedure on page
This task changes the OC-3/STM-1 optical service channel settings for
OSCM and OSC-CSM cards.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
at the node where you want to change the
Table 11-1. The provisionable parameters are listed in the
Chapter 11 Change DWDM Card Settings
Step 2.
13-2.
13-2.
September 2005