Ctc Software Delivery Methods - Cisco ONS 15454 DWDM Installation And Operation Manual

CTC Operation Reference
This chapter describes Cisco Transport Controller (CTC), the software interface for the
Cisco ONS 15454. For CTC setup and login information, see
the GUI."
Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note
Chapter topics include:
•
•
•
•
•
•
•
•

19.1 CTC Software Delivery Methods

ONS 15454 provisioning and administration is performed using the CTC software. CTC is a Java
application that is installed in two locations: it is stored on the TCC2 or TCC2P card and it is downloaded
to your workstation the first time you log into the ONS 15454 with a new software release.
19.1.1 CTC Software Installed on the TCC2/TCC2P Card
CTC software is preloaded on the ONS 15454 TCC2/TCC2P cards; therefore, you do not need to install
software on the TCC2/TCC2P cards. When a new CTC software version is released, use the
release-specific software upgrade document to upgrade the ONS 15454 software on the TCC2/TCC2P
card.
August 2005
19.1 CTC Software Delivery Methods, page 19-1
19.2 CTC Installation Overview, page 19-3
19.3 PC and UNIX Workstation Requirements, page 19-4
19.4 ONS 15454 Connections, page 19-6
19.5 CTC Window, page 19-7
19.6 TCC2/TCC2P Card Reset, page 19-14
19.7 TCC2/TCC2P Card Database, page 19-15
19.8 Software Revert, page 19-15
C H A P T E R
Chapter 2, "Connect the PC and Log into
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
19
19-1