Dlp- G195 Log Out A User On A Single Node - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 10 Manage the Node
CTC will allow you to delete other Superusers if one Superuser remains. For example, you can delete
Note
the CISCO15 user if you have created another Superuser. Use this option with caution.
Step 1 From the View menu, choose Go to Network View.
Step 2 Click the Provisioning > Security tabs. Highlight the name of the user you want to delete.
Click Delete. The Delete User dialog box appears.
Step 3
In the Select Applicable Nodes area, uncheck any nodes where you do not want to delete this user.
Step 4
Click OK. A User Deletion Results confirmation dialog box appears.
Step 5
Click OK to acknowledge the changes. Confirm that the changes appear; if not, repeat the task.
Step 6
Return to your originating procedure (NTP).
Step 7
DLP-G195 Log Out a User on a Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Active Logins tabs.
Step 1
Choose the user that you want to log out and click Logout.
Step 2
In the Logout User dialog box, check Lockout before Logout if you want to lock the user out. This
Step 3
prevents the user from logging in after logout based on user lockout parameters provisioned in the Policy
tab. A manual unlock by a Superuser is required, or else the user is locked out for the amount of time
specified in the Lockout Duration field. See the
task on page 10-46
Click OK.
Step 4
Click OK to confirm the logout.
Step 5
Step 6 Return to your originating procedure (NTP).
September 2005
This task logs out a user from a single node.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
for more information.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
DLP-G195 Log Out a User on a Single Node
"DLP-G188 Change Security Policy for a Single Node"
10-53