Dlp- G189 Change Security Policy For Multiple Nodes - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 10 Manage the Node
Step 4 In the Password Change area, you can modify the following:
•
•
•
•
To require users to change their password at periodic intervals, check the Enforce Password Aging check
Step 5
box in the Password Aging area. If checked, provision the following parameters:
•
•
Step 6 In the Other area, you can provision the following:
•
•
Step 7 Click Apply. Confirm that the changes appear.
Return to your originating procedure (NTP).
Step 8
DLP-G189 Change Security Policy for Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
Step 2 Click the Provisioning > Security > Policy tabs. A read-only table of nodes and their policies appears.
Step 3 Click a node on the table that you want to modify, then click Change.
If you want to modify the idle user timeout period, click the hour (H) and minute (M) arrows in the Idle
Step 4
User Timeout area for the security level that you want to provision: RETRIEVE, MAINTENANCE,
PROVISIONING, or SUPERUSER. The idle period time range is 0 and 16 hours, and 0 and 59 minutes.
The user is logged out after the idle user timeout period is reached.
September 2005
Prevent Reusing Last [ ] Passwords—Choose a value between 1 and 10 to set the number of different
passwords that the user must create before they can reuse a password.
New Password must Differ from the Old Password—Choose the number of characters that must
differ between the old and new password. The default number is 1. The range is 1 to 5.
Cannot Change New Password for [ ] days—If checked, prevents users from changing their
password for the specified period. The range is 20 to 95 days.
Require Password Change on First Login to New Account—If checked, requires users to change
their password the first time they log into their account.
Aging Period—Sets the amount of time that must pass before the user must change his or her
password for each security level: RETRIEVE, MAINTENANCE, PROVISIONING, and
SUPERUSER. The range is 20 to 95 days.
Warning Period—Sets the number days the user will be warned to change his or her password for
each security level. The range is 2 to 20 days.
Single Session Per User—If checked, limits users to one login session at one time.
Disable Inactive User—If checked, disables users who do not log into the node for the period of time
specified in the Inactive Duration box. The Inactive Duration range is 1 to 99 days.
This task changes the security policy for multiple nodes including idle user
timeouts, user lockouts, password change, and concurrent login policies.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
DLP-G189 Change Security Policy for Multiple Nodes
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
10-47