Cisco ONS 15454 DWDM Installation And Operation Manual page 467

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 8
Manage Alarms
Table 8-1
Column
New
Date
Node
Object
Eqpt Type
Slot
Port
Path Width
Sev
ST
SA
Cond
Description
Table 8-2
Table 8-2
Color
Red
Orange
Yellow
Magenta (pink) Raised Not Alarmed (NA) condition
Blue
White
If alarms are present, refer to the Cisco ONS 15454 DWDM Troubleshooting Guide, the
Step 2
Cisco ONS 15454 Troubleshooting Guide, or the Cisco ONS 15454 SDH Troubleshooting Guide for
information and troubleshooting procedures.
September 2005
Alarm Column Descriptions (continued)
Information Recorded
Indicates a new alarm; to change this status, click either the Synchronize button or
the Delete Cleared Alarms button.
Date and time of the alarm.
The name of the node where the alarm occurred.
TL1 access identifier (AID) for the alarmed object; for an STSmon or VTmon, this is
the monitored synchronous transport signal (STS) or Virtual Tributary (VT).
If an alarm is raised on a card, the card type in this slot.
If an alarm is raised on a card, the slot where the alarm occurred (appears only in
network and node view).
If an alarm is raised on a card, the port where the alarm is raised; for STSTerm and
VTTerm, the port refers to the upstream card it is partnered with.
Indicates how many STSs are contained in the alarmed path. This information
complements the alarm object notation, which is explained in the Cisco ONS 15454
DWDM Troubleshooting Guide, the Cisco ONS 15454 Troubleshooting Guide, or the
the Cisco ONS 15454 SDH Troubleshooting Guide.
Severity level: CR (Critical), MJ (Major), MN (minor), NA (Not Alarmed), NR
(Not Reported).
Status: R (raised), C (clear), T (transient).
When checked, indicates a service-affecting alarm.
The error message/alarm name; these names are alphabetically defined in the
Cisco ONS 15454 DWDM Troubleshooting Guide, the
Cisco ONS 15454 Troubleshooting Guide, or the Cisco ONS 15454 SDH
Troubleshooting Guide.
Description of the alarm.
lists the color codes for alarm and condition severities.
Color Codes for Alarms and Condition Severities
Description
Raised Critical (CR) alarm
Raised Major (MJ) alarm
Raised Minor (MN) alarm
Raised Not Reported (NR) condition
Cleared (C) alarm or condition
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
DLP-G115 View Alarms
8-7

Advertisement

Table of Contents
loading

Table of Contents