Table of Contents
Advertisement
Installing a Cisco 6260 with a POTS
Splitter Configuration
This chapter provides installation procedures for a Cisco 6260 with a POTS splitter configuration.
Note
The installation procedures in this chapter apply to a Cisco 6260 system shipped with the individual
hardware components already installed. For information about installing or replacing hardware
components in the Cisco 6260 chassis, see
Cisco 6260 System."
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution
Before you begin the installation procedures, read the entire chapter for important information and safety
warnings.
Note
Before installing and cabling the equipment, be aware of standard safety practices and the
hazards involved in working with electrical circuitry to prevent accidents. See the
Requirements" section on page 2-1
hazard-free installation.
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information for the Cisco 6260 System document.
See the
Tip
information about Cisco 6260 with a POTS splitter configuration components.
OL-2365-02
"Cisco 6260 System with a POTS Splitter Configuration" section on page 1-4
C H A P T E R
Chapter 6, "Upgrading and Maintaining the
for cautions and warnings that are necessary to ensure a safe and
Cisco 6260 Hardware Installation Guide
3
"Safety
for more
3-1
Advertisement
Table of Contents
