Cisco ONS 15454 DWDM Installation And Operation Manual page 58

DLP-G87 Verify the AD-xB-xx.x Output Express Power
DLP-G88 Verify the AD-xC-xx.x Output Express Power
DLP-G271 Verify the AD-xC-xx.x Output Common Power
DLP-G272 Verify the AD-xB-xx.x Output Common Power
DLP-G89 Verify OADM Node Pass-Through Channel Connections
DLP-G90 Verify an AD-xB-xx.x Pass-Through Connection Power
DLP-G91 Verify an AD-xC-xx.x Pass-Through Connection
DLP-G92 Verify 4MD-xx.x Pass-Through Connection Power
DLP-G93 Verify Add and Drop Connections on an OADM Node with OSCM Cards
DLP-G94 Verify Add and Drop Connections on OADM Node with OSC-CSM Cards
DLP-G277 Provision a Multirate PPM
DLP-G274 Verify Topologies for ETR_CLO and ISC Services
DLP-G278 Provision the Optical Line Rate
DLP-G279 Change the Optical Line Rate
DLP-G280 Delete a PPM
DLP-G216 Change Card Settings for TXP_MR_10G and TXP_MR_10E Cards
DLP-G217 Change Line Settings for TXP_MR_10G and TXP_MR_10E Cards
DLP-G218 Change Section Trace Settings for the TXP_MR_10G and TXP_MR_10E Cards
DLP-G219 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for SONET or SDH Payloads
DLP-G319 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for 10G Ethernet LAN Phy
DLP-G301 Provision the TXP_MR_10G and TXP_MR_10E Trunk Port Alarm and TCA Thresholds
DLP-G302 Provision the TXP_MR_10G and TXP_MR_10E Client Port Alarm and TCA Thresholds
DLP-G221 Change OTN Settings for TXP_MR_10G and TXP_MR_10E Cards
DLP-G222 Change Card Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G223 Change Line Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G224 Change Section Trace Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G225 Change Trunk Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G226 Change Line Thresholds Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G303 Provision the MXP_2.5G_10G and MXP_2.5G_10E Trunk Port Alarm and TCA Thresholds
DLP-G304 Provision the MXP_2.5G_10G and MXP_2.5G_10E Client Port Alarm and TCA Thresholds
DLP-G228 Change Line OTN Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
DLP-G229 Change Card Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards
DLP-G230 Change Line Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards
DLP-G231 Change Section Trace Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards
DLP-G232 Change TXP_MR_2.5G and TXPP_MR_2.5G Cards Line Threshold Settings for SONET or SDH
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
-58
5-3
5-6
5-8
5-8
Payloads
5-54
4-47
4-47
4-48
4-48
4-49
4-50
4-51
4-52
5-4
5-13
5-14
5-27
5-32
5-34
5-49
5-50
Chapter
4-53
4-56
5-17
5-19
5-21
5-24
5-25
5-36
5-38
5-39
5-41
5-43
5-44
5-53
August 2005