Overview - Cisco ONS 15454 DWDM Installation And Operation Manual

Card Reference
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter describes Cisco ONS 15454 dense wavelength division multiplexing (DWDM) card and
client card features and functions. It also describes the common control cards needed to support them as
well as the optical plug-in modules (Small Form-factor Pluggables [SFPs]). For installation and card
turn-up procedures, refer to
refer to the Cisco Optical Transport Products Safety and Compliance Information document.
Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note
Chapter topics include:
16.1 Card Overview, page 16-2
•
16.2 Common Control Cards, page 16-9
•
• 16.3 Front Mount Electrical Connections, page 16-21
• 16.4 Optical Service Channel Cards, page 16-25
16.5 Optical Amplifier Cards, page 16-34
•
16.6 Multiplexer and Demultiplexer Cards, page 16-45
•
16.7 Optical Add/Drop Multiplexer Cards, page 16-59
•
16.8 Transponder and Muxponder Cards, page 16-82
•
16.9 Transponder and Muxponder Protection, page 16-114
•
16.10 Far-End Laser Control (FELC), page 16-116
•
16.11 Jitter Considerations, page 16-116
•
16.12 Termination Modes, page 16-117
•
16.13 SFP and XFP Modules, page 16-118
•
April 2006
Chapter 3, "Turn Up a Node."
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
C H A P T E R
For card safety and compliance information,
16
16-1