Figure 1-17 Installing The Fan-Tray Assembly On The Ons 15454 Ansi - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 1 Install the Shelf and Common Control Cards
Figure 1-17
To verify that the tray has plugged into the assembly, look at the fan tray and listen to determine that the
Step 3
fans are running.
If you want to install an alarm expansion panel on the ONS 15454 ANSI shelf, continue with the
Step 4
"NTP-G9 Install the Alarm Expansion Panel (ANSI Only)" procedure on page
continue with the
procedure on page
Stop. You have completed this procedure.
August 2005
Installing the Fan-Tray Assembly on the ONS 15454 ANSI
FA N
FA IL
C R
IT
M A
J
M IN
LCD
Fan tray
assembly
"NTP-G10 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections"
1-47.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
NTP-G8 Install the Fan-Tray Assembly
1-44. Otherwise,
1-43